45 W Single Ouptput Industrial DIN Rail Power Supply · Installed on DIN rail TS35/7.5 or 15 · Full range, high reliability · Low cost, high reliability · High efficincy, low working temp. · Built in EMI filter, low ripple noise · Power on LED indication · Compact size, light weight · 100 % full load burn-in test · Short circuit/over load/over voltage/temp. Protection · Convection cooled · Approvals: TUV/CE · 2 years warranty

Input voltage ...................................... 85~264VAC / 120 ~ 370VAC selected by sw.
Input frequency................................... 47-440Hz
Inrush current...................................... cold start, 30A / 115V, 60A / 230V
Output voltage..................................... refer to below table (± 10% ADJ.)
Overload protection............................ 105 % ~ 135 % output constant current limiting
Over voltage protection....................... 115 % ~ 135%of rated O/P voltage
Setup, rise, hold up time...................... 800ms, 60ms, 50ms @ 230VAC
Withstand voltage................................ I/P-0/P:3KV, I/P-FG:1.5KV,1min.
Working temp..................................... 0-45 °C @100%, -10 °C @ 80%, 50°C @ 80%
Safety standard................................... UL508, TUV EN60950
EMC standard.................................... EN55022 class B, EN61000-3-2, 3
                                                            EN61000-4-2, 3, 4, 5, 6, 8, 11, ENV50204
Connection......................................... 4P/ 7.5mm pitch terminal block
Weight/packing .................................. 0.4kgs / pcs; 48pcs / 16kgts / 1.3 CUFT